“A Low-Cost Technique for In-Situ Stresses and Geomechanical Properties Measurement Based on Leak-Off Tests and Caliper Log” by Shunde Yin from the University of Wyoming.
“A Novel Point Process Filtering Paradigm for Modeling and Inversion of Microseismic Monitoring Data during CO2 Storage” by Behnam Jafarpour from the University of Southern California.
“Integration of Geophysical and Geomechanical Modeling to Monitor Integrity of Carbon Storage” by Birendra Jha (for Fred Aminzadeh) from the University of Southern California.
“Fundamental Studies on the Reaction Mechanisms of Oxygen Carriers for CLC/CLOU of Solid Fuels” by Richard Yetter from Penn State.
“Evaluation of Agglomeration Potential of Oxygen Carriers for Chemical Looping Combustion (CLC) and Chemical Looping with Oxygen Uncoupling (CLOU)” by Sarma Pisupati from Penn State.
“Validation of CFD Models for Turbulent, Supercritical CO2 Combustion” by Eric Petersen from Texas A&M University.
“Efficient Reduction of CO2 in a Bipolar Electrochemical Cell” by Michael Hickner from Penn State.
“Converting CO2 and Methane to Fuels by Enhanced Plasmonic Effects in a Nanotemplated Catalyst Plasma Reactor” by Xiaofang Yang (for Bruce Koel) from Princeton University.
“Designing Polymer/2D MOF Composite Membranes with Enhanced CO2Transport for CO2/N2 Separation” by Michael Hickner from Penn State.
“Layer-by-Layer Functional Thin Film Coatings for Enhanced Light Gas Separations” by Benjamin Wilhite from Texas A&M University.
“Grid Independence and Uncertainty Quantification in Gas-Solid Flow Simulations” by Akhilesh Bakshi (for Ahmed Ghoniem) from Massachusetts Institute of Technology.
“Methane Emissions Quantification (MEQ) of Compressor Stations” by Nino Ripepi from Virginia Polytechnic and State University.